Desicca Chemicals Manufacturers of Quality Chemicals
 
||| Products "  Desiccants  "  Molecular Sieves
 

Molecular Sieves 4 A

 

MOLSIEVE - 4A is Molecular Sieve type 4A, an alumino Silicate having pore opening of about 4 Angstroms (0.4 micron) and typical chemical formula Na2O Al2 O 2SiO2 - nH2O

 

Beads                     Pallets

Beads
Shape : Spherical
Size :1.5 - 3 mm

Pallets
Shape : Cylindrical
Size : 3 mm

 
APPLICATIONS
  • Molsieve 4A Can be used to dehydrate most fluids both in static and dynamic Conditions

  • Static applications include usage in desicant packages and for drying in insulating glass nits.
    Used for drying of refrigerant fluids used for drying of air Brakes.
  • Dynamic applications include drying and purification of Natural gas, LPG, air, inter gases and Solvents.
    Even Molsieve 4A work under adverse operating Conditions like

Drying gases to very low dew points;

Drying low relative humudity gases;

Drying high temparture gases;

Drying high velocity gases;

Drying gas mixture etc.

Drying gases and removing other impurities simultaneously;

Any combination of these conditions.

 
REGENERATION

MOLSIEVE 4A can be regenerated by evacuating or purging usually at elevated temperature.
The purge gas temprature must be sufficiently high to bring the molecular sieve to a level of 200 C to 300 C but not exceeding 600 Degree C,Higher temperature may cause physical degradation of molecular structure. The degree of regeneration depends on the temperature, pressure and composition of the purge gas and is a strong factor in affecting product purity. It is possible to dry fluids to less than 0:1 ppm total sulphur and CO2 if adequately regenerated.

 

TYPICAL PROPERTIES

Normal pore diameter

4 angstroms (0.4 micron)

Type of crystal structure

Cubic

Bulk density

770 g/l

Equilibrium water capacity at 20 D.C./55 % R.H.

25 % wt.

Water content

1.5% wt. (max.)

Heat of adsorption

4100 KJ/KG water (max.)

Specific heat (approx.)

1.07 KJ/KG C

Pellets Size Normal

1.5mm

3mm

Beads sizes normal

1.5 mm

3 mm

Crush strength

2kp

4 kp

 
PACKAGING

For Domestic and Exports
MOLSIEVE 4A is available in beads and pellets form both 1.5 mm and 3 mm diameters packed in 50/100 kgs M.S. Drum.

 
 

Top / Back

Desicca Chemicals Mumbai         Molecular Sieves India         Molsieve Thane         Alumino Silicate Mumbai         Natural Gas India